VIB®05 Vibrometer
The 3-in-1 machine condition monitoring
Vibration·Bearing Condition·Temperature
This Vibrometer has a built-in analysis function.
All you need is pushing the button and then the analysis result will be shown on the display.
Portable Vibrometer with ISO standard analysis function ,All you need is just install the sensor and push the start button. Big buttons that are easy to press even with gloves on .
What is "Vibration severity measurement instrument on the requirements 10816-3 ?
This standard is widely used for analysis of rotational machinery.
The current ISO standard 10816-3: 009 describes the absolute value judgment by velocity rms.
Easy-to-use handy vibrometer with diagnosis function VIB05 has three measurement modes such as acceleration, velocity and displacement.
Features
1. Three measurement modes : acceleration, velocity and displacement
2. Incorporates diagnosis functions compliant with ISO 10816-3
This unit automatically diagnoses the status of rotating machinery according to the vibration severity standard.
3. You can easily diagnose bearings according to the judgement criteria displayed on the back of the unit.
4. Incorporates a vibration pickup with a magnet to ensure stable measurement accuracy.
5. Carrying case made of hard-plastic is in standard configuration for easiness.
What can we know?
Acceleration
Bearing scratches, noise, gear abnormalities, cavitation, etc.
Velocity
Unbalance, misalignment, coupling failure, the slide bearing failure, foundation failure, impeller vibration, etc.
Displacement
Surging, water hammer, ground vibration, pulsation of the pipe
3 Measurements
Machine Vibration Measures
Velocity in mm/s RMS; Acceleration in g RMS; Displacement in um Peak-Peak
Vibration Evaluation: According to ISO10816-3。
Bearing Condition Measures
Bg - Hi Frequency Acceleration in g RMS;Bv - Hi Frequency Velocity in mm/s RMS。
Bearing Status Check: By using rules of thumb
Temperature Measure
Non-contact Infrared Sensor,Target and Environment in °C or °F,Red Laser Pointer。
VIB05 Specifications
Display: Monochromatic LCD, 128x64 pixial
Sensor: IEPE Accelerometer, 100mv/g, Integral 80 cm cable, BNC connector
Vibration:
Acceleration: 0-20 g Peak Frequency 10-12kHz
Velocity: 0-200mm/s RMS Frequency 10Hz-1kHz
Displacement: 0-2000 μm Peak-Peak Freq. 10Hz-1kHz
Bearing Status:
Bg: 0-20 g RMS Freq. Range 1kHz-12 kHz
Bv: 0-200 mm/s RMS Freq. Range 1kHz-12 kHz
Accuracy: < +/-5%
Alarm Indication:
Vibration Evaluation for velocity measure: ISO10816-3
Bearing Status check for BG and BV: Rule-of-thumb
Temperature:
IR Sensor temperature range: -20 °C to 120°C or -5°F to +250°F
Accuracy: ±2°C; Resolution: 1°C;
Laser guide : Red, <1mW. IEC 60825-1 compliant
Distance to surface D:S = 8:1; Recommend distance range: < 20 cm
Power & Charger:
Lithium rechargeable battery, 3.6V 1700 mAh,
Recharge time 3 hours ; Operating time >50 hours continuous
Mains charger: AC 100-240 V, 50/60 Hz input; 4.2 V DC 600 mA output
In-car charger: DC 12-24 V input; 4.2 V DC 600 mA output。
Environment:
Operation temperature: -10°C to +50°C; Storage temperature: -20°C to +60°C
Enclosure: IP64 - Dust-tight and splash-resistant
Electromagnetic compatibility certificate: 2004/108/EC
Dimensions:115 x 75 x 25mm(LxWxT)
Weight incl. battery:230g
VIB05 Complete Kit
http://www.kmvibrationanalyzers.com/